From pejo20 at sussex.ac.uk Wed Mar 12 15:35:20 2003 From: pejo20 at sussex.ac.uk (Johan Olanders) Date: Wed, 12 Mar 2003 14:35:20 +0000 Subject: Pre-processing problems Message-ID: <1047479720.3e6f45a8cdb49@webmail.sussex.ac.uk> Hi everybody! Since it's the first time I use this list I might introduce myself! My name is Johan Olanders and I'm doing my master thesis project regarding oestrogen modelling with GREAT-ER in the River Ouse catchment, Sussex, at University of Sussex, UK. Since this is a new catchment I have to implement it myself and right now I have some troubles in the preprocessing procedure. To the problem! As I have understood it the right place to start the pre-processing is to install Shapelib. I got no error messages executing the make command for Shapelib. Next I tried to install the gen2shp program. First I got loads of errors when executing make. After changing a path to the place where my shapfil.h were located in gen2shp.c (#include ) I get this error message when executing the make command: [johan at ouse gen2shp-0.3.1]$ make cc -o gen2shp -lshp gen2shp.c utils.o /usr/bin/ld: cannot find -lshp collect2: ld returned 1 exit status make: *** [gen2shp] Error 1 [johan at ouse gen2shp-0.3.1]$ (I run RedHat 8.0 on my PC and I am a bit Linux aware but not an expert!) Does anyone have any ideas? / Johan From jan at intevation.de Wed Mar 12 17:06:37 2003 From: jan at intevation.de (Jan-Oliver Wagner) Date: Wed, 12 Mar 2003 17:06:37 +0100 Subject: Pre-processing problems In-Reply-To: <1047479720.3e6f45a8cdb49@webmail.sussex.ac.uk> References: <1047479720.3e6f45a8cdb49@webmail.sussex.ac.uk> Message-ID: <20030312160637.GA850@intevation.de> Hello Johan, Since you are on a RedHat GNU/Linux, you might simply want to use the RPM packages of shapelib and gen2shp: ftp://intevation.de/freegis/gnu-linux-i586/freegis-1.2.2/i386/ The full story on the FreeGIS CD is here: http://freegis.org/cd-contents.en.html Else the following hints might help: On Wed, Mar 12, 2003 at 02:35:20PM +0000, Johan Olanders wrote: > Next I tried to install the gen2shp program. First I got loads of errors > when executing make. After changing a path to the place where my > shapfil.h were located in gen2shp.c (#include > ) You usually specify the include path in the Makefile like this: CFLAGS=-I /home/johan/Greater/Preproc/shapelib-1.2.9 You then do not need to change the actual source code. > I get this error message when executing the make command: > [johan at ouse gen2shp-0.3.1]$ make > cc -o gen2shp -lshp gen2shp.c utils.o > /usr/bin/ld: cannot find -lshp > collect2: ld returned 1 exit status > make: *** [gen2shp] Error 1 Same here: You need to specify where to find the libshp.la and adapt the CFLAGS. Maybe this works four your setup: CFLAGS=-I /home/johan/Greater/Preproc/shapelib-1.2.9 -L /home/johan/Greater/Preproc/shapelib-1.2.9 but this is just a guess - you should find out yourself the correct path. Hope this helps Jan -- Jan-Oliver Wagner http://intevation.de/~jan/ Intevation GmbH http://intevation.de/ FreeGIS http://freegis.org/ From pejo20 at sussex.ac.uk Tue Mar 18 18:04:43 2003 From: pejo20 at sussex.ac.uk (Johan Olanders) Date: Tue, 18 Mar 2003 17:04:43 -0000 Subject: Pre-processing problems (Ouse) solved! In-Reply-To: <20030312160637.GA850@intevation.de> Message-ID: > Hello Johan, > > Since you are on a RedHat GNU/Linux, you might simply want > to use the RPM packages of shapelib and gen2shp: > > ftp://intevation.de/freegis/gnu-linux-i586/freegis-1.2.2/i386/ > > Yes this solved my problems thank you very much Jan-Oliver! I also had some errors to fix in my data files before it turned up okay in GREAT-ER, but now it works! I have just implemented a small part of the catchment as a test so far and I have made my own solution of assigning flow values to river stretches. I would very much like to hear someone's comments on my solution or a description of how others have solved this task. Please contact me on pejo20 at sussex.ac.uk Bye for now! / Johan Olanders From jan at intevation.de Tue Mar 18 18:14:01 2003 From: jan at intevation.de (Jan-Oliver Wagner) Date: Tue, 18 Mar 2003 18:14:01 +0100 Subject: Pre-processing problems (Ouse) solved! In-Reply-To: References: <20030312160637.GA850@intevation.de> Message-ID: <20030318171401.GA20647@intevation.de> On Tue, Mar 18, 2003 at 05:04:43PM -0000, Johan Olanders wrote: > Yes this solved my problems thank you very much Jan-Oliver! > I also had some errors to fix in my data files before it turned up okay in > GREAT-ER, but now it works! Sounds GREAT :-) > I have just implemented a small part of the catchment as a test so far and I > have made my own solution of assigning flow values to river stretches. I > would very much like to hear someone's comments on my solution or a > description of how others have solved this task. Please contact me on > pejo20 at sussex.ac.uk If you like, you are welcome to post your solution on this mailing list. In case you write some documentation, we can publish your scripts and docs on the GREAT-ER developer page (provided, you like to release it as Free Software). Best Jan -- Jan-Oliver Wagner http://intevation.de/~jan/ Intevation GmbH http://intevation.de/ FreeGIS http://freegis.org/ From pejo20 at sussex.ac.uk Thu Mar 20 17:03:06 2003 From: pejo20 at sussex.ac.uk (Johan Olanders) Date: Thu, 20 Mar 2003 16:03:06 -0000 Subject: Pre-processing Ouse In-Reply-To: <20030318171401.GA20647@intevation.de> Message-ID: > > If you like, you are welcome to post your solution on this > mailing list. In case you write some documentation, > we can publish your scripts and docs on the GREAT-ER developer > page (provided, you like to release it as Free Software). > I have not (yet?) made any fancy scripts for my idea's of flow assignment to the river stretches, I have just made it "manually" so far. I might write some scripts later on and in that case I would be more than happy to share them on the GREAT-ER developer page! However it is more the thoughts and assumptions behind it I would like some comments on. I think I'll write a description of what I've done and than possibly get back for some comments! Regards, Johan Olanders From jan at intevation.de Sat Mar 22 00:12:16 2003 From: jan at intevation.de (Jan-Oliver Wagner) Date: Sat, 22 Mar 2003 00:12:16 +0100 Subject: Pre-processing Ouse In-Reply-To: References: <20030318171401.GA20647@intevation.de> Message-ID: <20030321231216.GB31688@intevation.de> On Thu, Mar 20, 2003 at 04:03:06PM -0000, Johan Olanders wrote: > I have not (yet?) made any fancy scripts for my idea's of flow assignment to > the river stretches, I have just made it "manually" so far. I might write > some scripts later on and in that case I would be more than happy to share > them on the GREAT-ER developer page! However it is more the thoughts and > assumptions behind it I would like some comments on. I think I'll write a > description of what I've done and than possibly get back for some comments! I would welcome any such written description and like to publish it on the website (or link to place where you publish it). Best Jan -- Jan-Oliver Wagner http://intevation.de/~jan/ Intevation GmbH http://intevation.de/ FreeGIS http://freegis.org/